Hi All
Picked up what was meant to be a 902-8A.
Turns out the rear cover is from a 902 but the body is definitely not.
It has a black tangerine, a days code of 1997, 46th week, and the Altec part number of 275x4, where x could be a 9, an 3 or an 8. No diaphragm.
Any thoughts on what the body is? Its got the shallow depth in the gap so the centering ring, and has a 1 inch throat exit.
Is there a list of these part numbers?
Thanks
Magnarc
It's pretty much gotta be a 908.
Not all vegetables make good leaders.
Maybe post a pic or a link to it. 902 and 908 are the same except for the diaphragms. Not very thick either if your used to 802's.
BillWojo
Sorry guys, i meant 909.
902, and 908 have 7/8 throats, 1 inch on the 909.
Note the number on the gasket below.
Last edited by bowtie427ss; June 23rd, 2017 at 06:41 PM.
Not all vegetables make good leaders.
bowtie thank you that's the same number as on the rim of mine, hidden under the rubber ring.
909 body with 902-8a cover.
I've seen 909s with just a loading cap and no full cover so I'd say this is where mine came from.
Thanks All.
Last edited by magnarc; June 24th, 2017 at 05:24 AM.
Bookmarks